5 Best RV Leveling Blocks 2021

Are you tired of leveling your RV or Travel Trailer with rocks and planks of woods? Or sleeping on an angle? If yes, worry not. You’re in the right place at the right time. The solution to your problem is RV Leveling blocks. Whether your camping preference is campgrounds or boondocking, it’s indisputable. You need the best RV Leveling blocks for the best camping experience.

What are RV Leveling Blocks?

These are accessories that are used to level an RV if it’s on an uneven level. They adjust the RV’s height either on one side or both sides. The camper leveler operates by adding height to the wheels. The leading solutions to achieving the desired height are ramps and blocks.

It must be noted that camping sites are not like regular cities where even roads are plenty. Mostly, you will come across things like rocks scattered on roads. Hence, if you’re not cautious enough, your RV will by itself go off. Situations like this make camping boring or annoying. That’s why you deserve the best in your camping expeditions, and the blocks will work magic in such circumstances.

Why do you need the best RV leveling blocks?

There are various reasons why you should have RV Leveling blocks. First, you need the best camping experience; even if camping is being associated with roughness, it doesn’t mean that you should fight gravity to prepare your dinner. You need a ground that makes work easier for your camping activities. Unlike other accessories, Leveling blocks are easy to set up; you’ll spend a few minutes on Leveling your RV.

The blocks are also an inexpensive alternative for a common problem. Most camping areas are not leveled. Investing less than $90 to improve your camping experience is not a bad idea. Above all, the blocks can be used anywhere and at any time. On the other hand, the blocks enable you to adjust your RV’s height in many ways that are from the height of the blocks to the height of the RV. The RV Leveling blocks are versatile, and they are a long term investment.

It’s vital to have the best RV Leveling blocks for your motorhome not to lose balance and fall. Therefore, whether you’re searching for an upgrade or a first timer in the Leveling block market, this is the right time to know more about Leveling blocks. The piece is going to provide you with profound insights regarding the blocks. You’ll go to the market having everything at your fingertips, which will save you from guesswork and wasting lots of time in the market.

Top 5 Best RV Leveler Blocks for RVs

Below are details of RV Leveling blocks that will help you to maneuver easily. Get the knowledge and apply it. With RV Leveling blocks, you’ll not be inconvenienced at any time in your camping. All you need is to purchase the best levelers for your RV, and all will be well. Don’t go cheap since at times cheap will be expensive, and also don’t go to the extended limits because sometimes expensiveness doesn’t mean quality. Live within your means.

Now that you know RV leveling blocks’ benefits, which one of these leveling systems is the best for you? However, there is no doubt that choosing the perfect one is quite challenging, as there are many options available in the market. Here are the top five RV leveling blocks so that you can choose the one that perfectly suits your specific requirements.

Andersen Camper Leveler

It is one of the most popular yet intuitive RV leveling block systems. The Camper Leveler by Andersen comes among the favorite levelers for many RV owners to fight uneven ground. This is because it has a curved design and boasts a robust thickness that lets you drive up to the height of your desire. When it comes to using these blocks, you will find that it is easy enough. You will only have to determine the height on which you want to drive your recreational vehicle.

After determining, you will need to drive to the leveler and stop at the point of height you wanted to achieve. Once done, you will have to add the wheel chock, and you are done. Unlike the other regular products, you will need assistance for setting up these RV leveling blocks. In other words, you will need another person to tell you to stop at the desired point and add the wheel block right away. The best thing about Anderson’s RV blocks is it can also serve as stabilizers. The special design of these blocks allows you to adjust the level up to 4 inches.

Pros

  • Can withstand the vehicle up to 30,000 lbs and the tires of a maximum of 32 inches
  • Requires only one level per axle at each side
  • High-quality and durability
  • Easy to set up and use
  • Can lift to 4-inches

Cons

  • Limited height reach; up to 4-inches
  • Tire size and weight capacity restrictions
  • Single-axle only

Camco FasTen 44515 Leveling Block

If your RV has dual tires, then these Camco RV leveling blocks are a perfect option for you. These interlocking leveling blocks are quite wide, offering 17inches on the side. In other words, it will allow your RV tires to roll over it without requiring you to have two sets of levelers, a nice feature. Another great thing about these leveling blocks is that it comes with a carrying handle, allowing you to store them conveniently. They are made of UV-treated resin, which can easily withstand harsh conditions and not wear out easily.

Pros

  • Ideal to use with other brand leveling blocks
  • It comes with a carrying handle that helps secure all blocks.
  • Customizable leveling
  • Safe and easy to use

Cons

  • It does not include filler caps.
  • Not as versatile as other brands
  • Quite expensive

Beech Lane Camper Leveler

If you are looking for some robust RV levelers, you should get your hands on these leveling blocks. It can level your trailer perfectly without any hassle. The best thing about these leveling blocks is that it is quite versatile and level up the dual axle trailers up to 32 inches tires. More interestingly, it comes with a complete kit: two rubber mats for grip, two levelers, and two-wheel chocks. Using these levelers will be a relief, and you will not need to stress about leveling your vehicle on bumpy surfaces. It can elevate up to 4-inches.

Pros

  • Precise and easy to install
  • Ideal for dual axle vehicles
  • It comes with grip mats that prevent sliding.
  • Can lift to 4-inches
  • It comes with a complete kit of levelers, grip mats, and chocks.

Cons

  • It may break if used on a rocky or sandy surface.
  • It comes for higher prices as compared to other blocks.

Camco Yellow Drive on Tri-Leveler

When it comes to RV gears, Camco is one of the widely known brands. Apart from their modular leveler, they offer this tri-leveling block. It allows you to achieve three different heights- 3.9 inches, 2.6 inches, and 1.3 inches. However, if you need more height, you will need to use additional leveling tile. These leveling blocks offer topnotch quality, as they comprise of high-quality resin.

Not to mention, resin makes these levelers durable for any weather. Therefore, if you are heading out in your RV in the cold season or rainy days, Camco tri-levelers can prevent you from dealing with the hassle. Note that it can withstand up to 3,500 pounds per wheel and comes with a non-slip surface. It is important to mention here that these levelers are not suitable for tandem wheels, as it will not provide your vehicle with a stable set-up.

Pros

  • Robust blocks that withstand heavy vehicles
  • Can raise the vehicle to 5-inches
  • Ensures to keep appliances and tanks to stay in their positions
  • It comes with a built-in handle.
  • Medium weight capacity of 10,000 lbs

Cons

  • It may not work properly and slip on smooth surfaces.
  • Limited height reach; can increase up to 8 inches.

Tri Lynx 00015 Lynx Levelers

Tri Lynx 00015 Lynx Levelers are like the Camco leveling blocks. But these RV leveling blocks come with a modular design. The main difference between these two options is that Lynx offers a 10-year warranty, which is great for RV owners who do not want to buy levelers every three years. These blocks are tough and robust, and they can withstand up to 40,000 lbs.

Best RV Leveling Blocks: Lynx

Therefore, whether you are driving a motorhome or Class A recreational vehicle, these levelers are ideal for any size vehicle. The honeycomb-like design allows it to withstand heavyweights. Whenever using these levelers, make sure to stack them like a staircase. Lynx leveling blocks comprise of thick plastic that offers high quality and great durability. However, use the cap on the top layer of these blocks whenever you are using it for the jack. This will prevent the interlocks from bent or mashed out of shape.

Pros

  • It weighs less than 10 pounds.
  • The company gives a 10-year warranty on these blocks.
  • It is easy to install
  • Offers high-quality in affordable price
  • Acts also as the stabilizer
  • High weight capacity of up to 40,000 pounds
  • Heavy-duty, interlocking, and modular design

Cons

  • It comes with a Nylon bag that is quite flimsy.

Why do you need Leveling blocks for your RV?

There are various reasons why campers need to be at the required levels. They include;

  • It’s neither comfortable nor healthy to sleep in a bed that is twisted at an angle, more so when your head is at a lower level than your legs.
  • When the RVs are not on even grounds, doors open each time, which may scare your kids and also causes the items in the cupboard to fly out. On top of that, items can hit the floor and break or hit your head.
  • The central appliance, in this case, is the fridge. To avoid breaking, many types of refrigerators need a level surface. Compared to the expenses of a broken fridge and the hassle, buying an RV fridge leveler is the cheapest alternative.

How to Block: What does blocking an RV mean?

Do you know what is involved in blocking? If yes, lucky you, but if you’re not accustomed to blocking, below are five easy blocking steps to follow:

  1. Position your RV two feet from the destined stopping point. The distance should correspond with the length of the blocks.
  2. Put your engine off and engage the parking brake.
  3. Establish the number of blocks each tire will need in lifting. It will take a few attempts to ascertain the optimum position. Once you gain experience, this step will be an easy task.
  4. Set the blocks against the prescribed tire; it may be at the front or back, depending on the direction you’re heading. For you to maintain the ramp-like structure, slightly offset stacked blocks.
  5. Now you are free to tow the vehicle or start the RV. Next is for you to release the brake then engage the transmission. Idle speed your engine so that it can power up the stacked blocks. If your ramp consists of three or more blocks, it’s advisable to use an accelerator to avoid dismantling the ramp structure. Ensure that one foot is on the break, and once you reach the center of the top block stop.

What Should you Look for When Buying RV Leveling Blocks?

Like every other product in the market, Leveling blocks also have various features that make them distinct from each other. Therefore, it’s upon you to identify the features that suit your interests. But what are the best qualities?

Durability

When it comes to Leveling blocks, the strength of the materials used to make them is essential. If the blocks aren’t reliable, cracks will start to develop, and eventually, they will give away. This will cause serious harm, especially when you’re doing something in the RV, such as cooking.

Also, the blocks should be able to withstand extreme temperatures. They must be able to adjust effectively to adverse weather conditions such as hot days and cold nights.

The warranty should be your guideline when finding out the durability of the blocks. A confident manufacturer has better warranty offerings.

Weight

Your Leveling block should be able to survive even with the heaviest types of RVs. There are various Leveling blocks in the market; levelers like BAL 28050 holds a maximum weight of 1,500 lbs only, while others such as Lynx RV Leveling blocks and Quality Plastics Blocks can hold up a mass of 40,000 kg.

Ensure that you’re aware of your camper’s weight mass with or without any additional weight inside. This will help you to buy a leveler that can sustain the weight of your RVs.

Ease to use

Are you able to handle the leveler alone? That’s a nice feature if you’re traveling by yourself. If the leveler looks like it will involve more than one person to fix it, avoid it. Look for leveling systems you can set up by yourself. Some of them come with kits that will help you in setting up. Find one-person installing kits.

Also, consider the cleaning and storage factor. Cleaning and storage should not be a hectic chore.

Price

For any camper, the cost is a significant concern. There should be a perfect blend between durability, ease to use, weight, and price. Some levelers are extremely expensive due to their extended warranty, additional features, or name brands. Consider your financial muscles when making this decision.

RV Leveling blocks

To many campers, this is their standard RV leveling system. The main ones are the Camco models; Camco Heavy Duty and Camco Fasten.

They are made of hard and durable rectangular or square plastics and are arranged on top of each other until the RV’s desired height is attained. Most of them have maximum height limits for safety measures. For instance, Camco models have a limit of 4 inches in height.

About the Best RV Leveling Blocks

The blocks can be built in a stair structure for the RV tires to climb to the highest level. They are 1 inch thick; hence, you get a one-inch height increment when stacking them one by one.

Pros

  • They are cheap
  • Easy to use
  • Easy to clean and store
  • Strong and durable
  • They are light

Cons

  • Tedious in installation
  • Require multiple trials to get it right
  • They may slip

RV Leveling Ramps

The good thing with these kinds of levelers is that they don’t need to remove or add blocks. Stacking is not involved. In terms of design, they are curved, and the only thing a camper is required to do is place the ramp behind or in front of the RV wheels and keep moving to the desired level.

Pros

  • Easy to use
  • Less tedious

Cons

  • More expensive

Scissor-style RV Levelers

Regarding these levelers, one needs to drive their RV onto them or put them around the camper’s tires one by one. The solution is for those campers that only have one axle.

Pros

  • They are light
  • Reliable on solid grounds

Cons

  • A bit expensive
  • Confined to lighter and smaller trailers
  • Not useful in muddy and soft grounds

Inflatable Levelers

These are flat bags that are put under the wheel that’s being leveled. Air is pumped onto these bags using a tire inflator pump till the desired height is achieved.

Pros

  • Easy to use
  • Works well in a maximum inflatable height

Cons

  • It makes the camper unstable.
  • Can cause tire suspension

Electric RV Leveling Jacks

Do you want your RV to be leveled by just one push of a button? Then think no further. Electric RV Leveling jacks is the option for you. These jacks can level an RV with little human intervention. Hydraulic jacks might be the easiest way Rvers can level a rig, but they are also the most expensive.

Best RV Leveling Blocks: Hydraulic Levelever System

Pros

  • Less tedious
  • Saves time

Cons

  • Very expensive

DIY solutions

When it comes to Do It Yourself (DYI) levelers, the sky’s not the limit. This is because you can come up with an idea from the available resources. But since the homemade solutions do not go through product development, design, and testing, it’s not advisable to use them.

Consider making your own Leveling blocks if you got spare lumber. The process is easy and cheap. You should know that the appropriate size for blocks ranges from eight to ten inches, and the thickness is between 1 to 2 inches.

Start by cutting 1 to 2 inches thick to the desired size of eight to ten inches per side. On the one hand, attach the screw eyelet. Then tie a string or a rope on the aperture. This will make it easier when pulling your blocks.

Pros

  • Cheapest alternative

Cons

  • Substandard materials

The difference between Leveling the RV and stabilizing the RV

Most people think that Leveling the RV and stabilizing the RV is the same thing. This is not the truth. Leveling the RV means lifting the coach to obtain the required level’s degree on an uneven surface. On the other hand, stabilizing means, the elimination of RV bounce on the leveled coach. Some RVs come along with stabilizers. This is not designed to level the RV but to hold some weight for the RV to stabilize. In most cases, when the stabilizing jacks are used for Leveling, they break, and also, they may cause some damages to the camper.

FAQ

How can you make your own Leveling blocks?

Consider making your Leveling blocks if you got some spare lumber. The process is easy and cheap. You should know that the appropriate size for blocks ranges from eight to ten inches, and the thickness is between 1 to 2 inches.

Start by cutting 1 to 2 inches thick to the desired size of eight to ten inches per side. On the one hand, attach the screw eyelet. Then tie a string or a rope on the aperture. This will make it easier when pulling your blocks.

Do RV Leveling blocks work?

The answer is a big yes. You should know that if the levelers are placed on the ground, they will add your wheels’ height. Typically, the levelers are placed on top of each other to reach the prescribed height. Other levelers are ramps that you can drive on them.

How can you use RV Leveling blocks?
Using Leveling blocks is extremely easy. Just put the blocks on the ground that your wheel or wheels will be, stack them to the height is on your RV level. All you need for the ramp campers are to set them down and then driving on top of them.
What is the exact number of blocks does one need?
For the single-axle RVs, one needs one set of 10 blocks or a leveler ramp. As for the tandem wheels, two sets are enough. But if you need to level both front and back wheels, you need an extra set of blocks. Therefore, to be on the safe side, get at least two.

Do RV Leveling blocks work?

The answer is a big yes. You should know that if the levelers are placed on the ground, they will add your wheels’ height. Typically, the levelers are placed on top of each other to reach the prescribed height. Other levelers are ramps that you can drive on them.

Conclusion:

RV blocks and ramps are essential accessories for any unlevel campground. They make work more comfortable, and above all, they enhance your camping experience. You need to be well-versed in these facilities’ knowledge to make a sound decision for your camper.

The Leveling blocks for RVs should be cost-effective, easy to use, hold the desired weight, and durable. Don’t underestimate the power of the Leveling blocks. They increase safety, improve your health, protect items from not breaking, and last but not lost, protect you from serious injuries. Now that you’ve known everything, the decision is purely yours, buy the best.

Hey! I have been fond of the topic of RV for more than 5 years. I have experience in the features of life on wheels. I’m a member of various RV communities and support communication with people who live in RV full time. I hope my articles will be useful to you.

Charley Waters

Hey! I have been fond of the topic of RV for more than 5 years. I have experience in the features of life on wheels. I'm a member of various RV communities and support communication with people who living in RV full time. I hope my articles will be useful to you.

View stories
Scroll Up